Tesla Model Y Juniper Interior Accessories
Designed for comfort, organization, and everyday use
Interior Upgrades
Upgrade one of the most noticeable areas of your Tesla interior with this Real Carbon Fiber Center Console Overlay Set, designed specifically for the Tesla Model Y Juniper (2026+) and Model 3 Highland (2024+).
Unlike plastic or vinyl alternatives, these overlays are manufactured from genuine molded carbon fiber, delivering an authentic carbon fiber weave with exceptional fit and finish. The precision-wrapped edges and factory-inspired design create a seamless appearance while protecting your original center console from scratches and daily wear.
Available in Gloss for a deep reflective finish or Matte for a clean satin performance look.
Product Highlights
Genuine Molded Real Carbon Fiber
Available in Gloss or Matte Finish
Complete 3-Piece Overlay Set
Precision-wrapped edges
Factory-inspired fit and appearance
Protects factory center console from scratches and wear
Lightweight, durable construction
Automotive-grade adhesive pre-installed
Easy peel-and-stick installation
No drilling or modifications required
Vehicle Fitment
Tesla Model Y Juniper
2026+
Premium and Performance trim only
Tesla Model 3 Highland
2024+
All trims
Why We Like It
The center console is one of the focal points inside every Tesla. This genuine molded carbon fiber overlay set completely transforms the appearance with authentic carbon fiber construction instead of imitation finishes. The precision-wrapped edges and clean weave provide a premium upgrade that blends naturally with Tesla's minimalist interior.
Installation Notes
Thoroughly clean the factory console before installation.
Test fit all three pieces before removing the adhesive backing.
Install on a clean, dry surface.
Press each piece firmly into place for 30–60 seconds.
Allow approximately 24 hours for the adhesive to fully bond.
What's Included
(3) Real Carbon Fiber Center Console Overlay Pieces
Pre-installed automotive-grade adhesive
Secure Checkout
Secure checkout powered by eBay — trusted payments, fast shipping, and buyer protection.
Transform your Tesla's interior with a full replacement dashboard trim crafted from real carbon fiber. Unlike overlay covers, this replacement trim completely replaces the factory dashboard accent for a seamless, premium appearance while showcasing authentic carbon fiber throughout.
Available in both Gloss and Matte finishes, this upgrade delivers a refined performance-inspired look while maintaining a clean factory-style interior.
Product Highlights
Real carbon fiber construction
Full dashboard replacement trim (not a stick-on overlay)
Available in Gloss or Matte finish
Precision molded for an excellent fit
Lightweight and durable construction
Factory mounting clip locations
Clean, premium appearance
Direct replacement installation
Fitment
Tesla Model Y Juniper
2026+
Tesla Model 3 Highland
2024+
Why We Like It
The dashboard is one of the largest visual surfaces inside the cabin. Replacing the factory trim with real carbon fiber immediately transforms the interior and creates a premium performance-inspired appearance while maintaining a clean, factory-style fit.
Unlike overlay pieces, this replaces the original dashboard trim for a more integrated result.
Installation Notes
Direct replacement dashboard trim
Factory-style mounting clip locations
Professional installation recommended if you are unfamiliar with removing interior trim panels
Available in Gloss or Matte carbon fiber
Secure Checkout
Secure checkout powered by eBay — trusted payments, fast shipping, and buyer protection.
Add a premium performance-inspired touch to your Tesla interior with this Real Carbon Fiber Armrest Cover, designed specifically for the Tesla Model Y Juniper (2026+) and Tesla Model 3 Highland (2024+).
Made from genuine carbon fiber, this precision-molded cover installs directly over the factory armrest using pre-installed automotive-grade adhesive. It instantly enhances the appearance of your center console while helping protect the original armrest from scratches, scuffs, and everyday wear.
Choose between a deep Gloss finish or a refined Matte finish to match your interior style.
Product Highlights
Genuine Real Carbon Fiber Construction
Available in Gloss or Matte Finish
Designed for Model Y Juniper & Model 3 Highland
Precision factory-inspired fit
Protects the factory armrest from scratches and wear
Lightweight and durable
Automotive-grade adhesive pre-installed
Easy peel-and-stick installation
No drilling or permanent modifications required
Vehicle Fitment
Tesla Model Y Juniper
2026+
All trims
Tesla Model 3 Highland
2024+
All trims
Why We Like It
The center armrest is one of the most frequently touched surfaces inside the vehicle. This genuine carbon fiber cover adds a refined performance look while helping preserve the factory finish. Its precision-molded shape blends seamlessly with Tesla's minimalist interior for a clean, premium appearance.
Installation Notes
Clean the factory armrest thoroughly.
Test fit before removing the adhesive backing.
Install on a clean, dry surface.
Press firmly for 30–60 seconds.
Allow approximately 24 hours for the adhesive to fully bond.
What's Included
(1) Real Carbon Fiber Armrest Cover
Pre-installed automotive-grade adhesive
Secure Checkout
Secure checkout powered by eBay — trusted payments, fast shipping, and buyer protection.
Give your Model Y Juniper a premium entrance every time you open the door. These Real Carbon Fiber Front Door Sill Trim Covers are precision-made for the 2026+ Tesla Model Y Juniper, adding both protection and a high-end performance appearance to one of the most frequently used areas of your vehicle.
Manufactured from genuine carbon fiber, these trim covers install directly over the factory door sills using pre-installed automotive-grade adhesive. They help protect against scratches, shoe scuffs, and everyday wear while maintaining an OEM-inspired appearance.
Available in Gloss or Matte carbon fiber finishes.
Product Highlights
Genuine Real Carbon Fiber Construction
Available in Gloss or Matte Finish
Designed specifically for Model Y Juniper (2026+)
Protects factory door sills from scratches and scuffs
Precision OEM-style fitment
Lightweight and durable
Automotive-grade adhesive backing
Simple peel-and-stick installation
No drilling or modifications required
Vehicle Fitment
Tesla Model Y Juniper
2026+
All trims
Why We Like It
The front door sills are one of the first areas to show wear from daily use. These genuine carbon fiber trim covers not only help protect the factory finish but also add a refined performance-inspired look every time you open the doors. The integrated MODEL Y logo complements the factory styling while the real carbon fiber weave delivers a premium appearance.
Installation Notes
Clean the factory sill thoroughly before installation.
Test fit each piece before removing the adhesive backing.
Install on a clean, dry surface at room temperature.
Press firmly for 30–60 seconds.
Allow approximately 24 hours for the adhesive to fully bond.
What's Included
(2) Real Carbon Fiber Front Door Sill Trim Covers
Pre-installed automotive-grade adhesive
Secure Checkout
Secure checkout powered by eBay — trusted payments, fast shipping, and buyer protection.
Enhance the interior of your Tesla Model Y Juniper with these Real Carbon Fiber Door LED Light Strip Covers. Designed specifically for the factory LED accent light trim, these precision-fit overlays add a premium motorsport-inspired appearance while preserving the original ambient lighting.
Available in your choice of Gloss Carbon Fiber or Matte Dry Carbon Fiber, allowing you to match the finish of your existing carbon fiber interior accessories.
Product Highlights
Crafted from genuine carbon fiber
Available in Gloss or Matte Dry Carbon Fiber
Precision molded for Tesla Model Y Juniper
Maintains full visibility of the factory ambient LED light strip
Lightweight and durable construction
OEM-style fit and finish
Automotive-grade adhesive for secure installation
No permanent modifications required
Fitment
Fits:
Tesla Model Y Juniper (2026+)
Finish Options
Gloss Carbon Fiber
Deep high-gloss finish that enhances the carbon fiber weave and pairs perfectly with other gloss carbon fiber interior accessories.
Matte Dry Carbon Fiber
Satin finish with reduced reflections for a refined OEM+ appearance while showcasing the natural carbon fiber weave.
Why We Like It
These covers transform one of the most visible areas of the interior without hiding the factory ambient lighting. The result is a subtle, factory-inspired carbon fiber upgrade that complements the clean design of the Model Y Juniper cabin.
Installation Notes
Cleans and installs directly over the factory door LED light trim.
Automotive-grade adhesive is pre-installed.
Test fit before removing the adhesive backing.
Clean the installation surface thoroughly for best adhesion.
What's Included
2 Front Door LED Light Strip Covers
2 Rear Door LED Light Strip Covers
Total: 4 Pieces
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Give your steering wheel a premium appearance with this genuine carbon fiber lower steering wheel trim cover. Designed specifically for the Tesla Model 3 Highland and Model Y Juniper, it installs directly over the factory trim for an instant interior upgrade without replacing your steering wheel.
Choose between a deep Gloss Carbon Fiber finish or a refined Matte (Dry) Carbon Fiber finish to match your interior style.
Product Highlights
Genuine real carbon fiber construction
Available in Gloss or Matte (Dry Carbon Fiber)
Precision molded specifically for Tesla steering wheels
Lightweight and durable
Enhances the center spoke with a premium appearance
Simple peel-and-stick installation using pre-installed automotive adhesive
No drilling or permanent modifications required
Fitment
Tesla Model 3 Highland (2024-2026 USA)
Tesla Model Y Juniper (2025-2026 USA)
Designed for left-hand-drive North American vehicles.
Why We Like It
This is one of those subtle upgrades that makes a noticeable difference every time you drive. The genuine carbon fiber weave adds a premium motorsport-inspired touch while maintaining a clean appearance that looks factory installed.
Installation Notes
Clean the factory surface thoroughly before installation.
Test fit before removing the adhesive backing.
Apply firm pressure for 30-60 seconds after installation.
Installing in a warm environment helps achieve the best adhesive bond.
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Add extra storage to your Model Y Juniper Standard with this custom-fit front console storage tray. Designed specifically for the Standard trim center console layout, this organizer creates a convenient storage area for small everyday items while maintaining a clean OEM appearance.
The built-in sliding cover allows you to hide items out of sight, helping keep your interior neat and organized.
Product Highlights
Designed specifically for Tesla Model Y Juniper Standard trim
Creates additional front console storage space
Sliding cover conceals stored items
Keeps small items organized and easily accessible
OEM-style fit and appearance
Durable ABS construction
Easy drop-in installation
Perfect for sunglasses, keys, cards, and small accessories
Fitment
Fits:
Tesla Model Y Juniper Standard (2026+)
Does Not Fit:
Tesla Model Y Juniper Premium/Performance
Tesla Model Y (2020-2025)
Why We Like It
The front console area on the Standard trim has unused space that can easily become a catch-all for loose items. This organizer makes that space more functional by adding hidden storage while keeping everyday essentials within easy reach.
Installation Notes
Drop-in installation
No tools or modifications required
Sliding cover opens and closes smoothly
Easily removable for cleaning
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Keep your center armrest organized with this custom-fit bottom organizer tray designed specifically for the Tesla Model Y Juniper Standard Trim. This tray creates dedicated storage compartments for your everyday essentials while helping keep the armrest compartment neat and clutter-free.
Product Highlights
Custom designed for Tesla Model Y Juniper Standard Trim 2026+
Creates additional organization inside the center armrest compartment
Dedicated compartments for small everyday items
Keeps keys, cards, cables, and accessories neatly organized
OEM-style fit and appearance
Durable and easy-to-clean construction
Non-slip textured surface helps keep items in place
Simple drop-in installation
Fitment
Fits:
Tesla Model Y Juniper Standard Trim 2026+
Does Not Fit:
Tesla Model Y Juniper Premium Trim
Previous generation Tesla Model Y
Tesla Model 3
Why We Like It
The center armrest can quickly become a catch-all for loose items. This organizer tray makes better use of the available space by separating small items and keeping essentials easy to find instead of digging through the entire compartment.
Installation Notes
Drop-in installation
No tools or modifications required
Easily removable for cleaning
Installs in seconds
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Protect the sides of your center console from everyday scuffs and scratches with these custom-fit protector mats for the Tesla Model Y Juniper. Designed to blend seamlessly with the factory interior, these protective mats help keep your console looking new while adding a subtle layer of protection where passengers' legs and shoes make the most contact.
Product Highlights
Custom designed for Tesla Model Y Juniper 2026+
Protects against scuffs, scratches, and shoe marks
OEM-style textured finish blends with the factory interior
Helps preserve the condition of the center console panels
Easy to wipe clean and maintain
Durable and long-lasting material
Four-piece set for complete side coverage
Simple peel-and-stick installation
Fitment
Fits:
Tesla Model Y Juniper 2026+
All trim levels
Does Not Fit:
Previous generation Tesla Model Y (2020-2025)
Tesla Model 3
Why We Like It
The sides of the center console are one of the most frequently touched areas in the cabin and can quickly develop scuffs from shoes and everyday use. These protector mats help preserve your interior while maintaining a clean, factory appearance.
Installation Notes
Clean the surface before installation.
Peel and apply using the pre-installed adhesive backing.
Press firmly to ensure proper adhesion.
Installation takes approximately 5 minutes.
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Protect your door pockets from scratches, dirt, spills, and everyday wear with these custom-fit full door pocket insert protectors for the Tesla Model Y Juniper. Unlike small liners that only cover the bottom, these full-coverage inserts protect the entire pocket area while giving the interior a cleaner, more finished look.
Product Highlights
Custom designed for Tesla Model Y Juniper 2026+.
Full-coverage design protects the entire door pocket area.
Helps prevent scratches, scuffs, dirt, and spills.
Makes door pockets easier to clean and maintain.
Adds extra protection for frequently used storage areas.
Durable and lightweight construction.
Easy drop-in installation with no modifications required.
Includes all four door pocket inserts.
Fitment
Fits:
Tesla Model Y Juniper (2026+)
Does Not Fit:
Previous generation Tesla Model Y.
Why We Like It
The factory door pockets are one of the easiest places to collect dust, crumbs, and everyday debris. These full-coverage inserts make cleanup much easier and help protect the original door panels from scratches caused by bottles, keys, and other loose items. The finished look also gives the door pockets a more premium appearance.
Installation Notes
Simple drop-in installation.
No tools or adhesives required.
Removes easily for cleaning.
Installs in seconds.
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Add convenient hidden storage to your Tesla's interior with this under screen storage tray. Designed specifically for the Model 3 Highland and Model Y Juniper, this organizer mounts beneath the center display and folds closed when not in use, keeping your essentials organized and out of sight.
Product Highlights
Custom designed for Tesla Model 3 Highland and Model Y Juniper
Hidden storage compartment beneath the center display
Fold-down tray opens and closes for easy access
Concealed design maintains a clean OEM appearance
Perfect for sunglasses, garage remotes, parking cards, and small essentials
Smoke black finish blends seamlessly with the interior
Adds extra storage without interfering with vehicle functions
Tool-free installation
Fitment
Fits:
Tesla Model 3 Highland 2024+
Tesla Model Y Juniper 2026+
Does Not Fit:
Previous generation Model 3
Previous generation Model Y
Why We Like It
Tesla interiors are beautifully minimal, but storage can sometimes be limited. This hidden under screen tray makes use of unused space while keeping small items within easy reach. When closed, only a small pull tab remains visible, giving it a clean OEM-style appearance.
Installation Notes
Quick and easy installation
No drilling or modifications required
Fold-down tray design for convenient access
Can be removed without leaving any permanent marks
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Add extra organization and make better use of your center console space with this custom-fit storage organizer. Designed specifically for the Tesla Model 3 Highland and Model Y Juniper, this organizer creates dedicated compartments for your everyday essentials while helping keep the center console neat and clutter-free.
Product Highlights
Custom designed for Tesla Model 3 Highland and Model Y Juniper.
Creates additional storage compartments inside the center console (upper position).
Keeps small items organized and easy to find.
Helps reduce clutter inside the center console.
OEM-style fit and finish for a seamless appearance.
Durable construction built for daily use.
Non-destructive drop-in installation.
Fitment
Fits:
Tesla Model 3 Highland (2024+)
Tesla Model Y Juniper (2026+)
Does Not Fit:
Previous generation Model 3 or Model Y.
Why We Like It
The center console storage area is deep and can quickly become a catch-all for loose items. This organizer makes better use of the space by creating separate compartments for items like keys, cards, charging cables, sunglasses, and other daily essentials. Everything stays organized and easier to access.
Installation Notes
Simple drop-in installation.
No tools or modifications required.
Removes easily for cleaning.
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Add extra comfort and protect your factory armrest from scratches, wear, and everyday use with this custom-fit center armrest cover. Designed specifically for the Tesla Model 3 Highland and Model Y Juniper, this cover installs in seconds and maintains full opening and closing functionality of the center console.
Available in both black and white to perfectly match your Tesla interior.
Product Highlights
Custom designed for Tesla Model 3 Highland and Model Y Juniper
Available in Black or White
OEM-style appearance and fitment
Helps protect against scratches, wear, and discoloration
Soft padded surface for added comfort
Does not affect opening or closing of the center console
Precision molded for a secure fit
Quick and easy installation
Fitment
Fits:
Tesla Model 3 Highland (2024+)
Tesla Model Y Juniper (2026+)
Available Colors:
Black
White
Why We Like It
The center armrest is one of the most frequently touched areas in the cabin and can quickly show signs of wear. This cover adds an extra layer of protection while improving comfort and maintaining a factory appearance. It's also a great option for preserving your original armrest and keeping your interior looking new.
Installation Notes
Simply place the cover over the factory armrest
No tools or modifications required
Maintains full armrest opening and closing functionality
Installs in seconds
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Miss having a traditional gear selector in your Tesla?
This Shift Stalk Retrofit Kit restores the familiar stalk-based gear selection many drivers prefer while maintaining a clean OEM-style appearance. Designed specifically for Tesla Model Y Juniper and Tesla Model 3 Highland USA-spec vehicles, this system allows convenient Drive, Reverse, Neutral, and Park selection directly from the steering column.
Perfect for owners who prefer physical controls over touchscreen-only shifting, this retrofit helps create a more familiar driving experience while blending naturally into the factory interior.
The kit includes the required wiring harnesses and installation components for a clean installation without permanent vehicle modifications.
Why You'll Like It
Restores traditional stalk-based shifting
OEM-style appearance and integration
Physical gear selection without relying solely on the touchscreen
Plug-and-play design
No permanent modifications required
Clean factory-inspired fit and finish
Familiar and intuitive operation
Designed specifically for USA-spec Juniper and Highland vehicles
Includes wiring harnesses and installation accessories
Compatibility
Compatible With:
Tesla Model Y Juniper 2026+ USA Version
Tesla Model 3 Highland 2025-2026 USA Version
Not Compatible With:
Legacy Model Y (Pre-Juniper)
Legacy Model 3 (Pre-Highland)
Non-USA vehicles unless compatibility has been verified
What's Included
Shift stalk assembly
Steering column trim housing
Vehicle-specific wiring harnesses
Extension cable
Installation hardware
Trim removal tool
Installation accessories
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Upgrade and protect your Tesla Model Y Juniper interior with this premium Nappa leather full seat cover set designed specifically for the 2026+ Juniper refresh.
This full 12-piece interior set provides complete front and rear seat coverage while maintaining a clean OEM+ factory-inspired appearance. Designed for daily driving, these covers help protect your factory seats from spills, dirt, pets, passengers, scratches, and everyday wear.
Available Colors:
Black — factory-inspired OEM+ appearance
White — clean factory white interior look
Red — luxury performance-inspired deep red tone
The red option is a deeper luxury-style red tone and may appear brighter in photos depending on lighting and camera exposure.
Includes front armrest cover.
Compatible with Tesla Model Y Juniper 2026+ Premium Trim.
(Standard trim compatibility has not yet been confirmed.)
Features
Designed for Tesla Model Y Juniper 2026+
Full 12-piece seat cover set
Available in Black, White, and Red
Premium Nappa leather-style material
OEM+ factory-inspired appearance
Full front and rear seat coverage
Front armrest cover included
Airbag-compatible breakaway side seam design
Waterproof and easy to clean
Kid and pet friendly
Helps protect against spills, dirt, scuffs, and daily wear
Durable daily-use protection
Compatibility
Compatible With:
Tesla Model Y Juniper 2026+ Premium Trim
Compatibility Notes:
Standard trim compatibility has not been confirmed
Designed for Model Y Juniper seats only
Not confirmed for previous Model Y generations
What’s Included
Front seat covers
Rear seat covers
Headrest covers
Rear center armrest compatible sections
Front armrest cover
Full 12-piece seat cover set
Heated & Ventilated Seat Information
Heated seats will still work with these covers installed. However, because the covers add an additional layer between the seat and occupant, the heat may take slightly longer to be felt.
Ventilated/cooled seat airflow may also be reduced due to the added material layer.
We prefer to be transparent about this so customers know exactly what to expect before purchasing.
Wrinkles & Creases From Shipping
Wrinkles and creases from shipping are completely normal for leather-style seat covers.
For best results:
Lay the covers in the sun before installation
Use a clothing steamer to help reduce deeper creases
Pull the material taut during installation for improved fitment
Over time, regular cabin heat and normal daily use will continue helping the material relax naturally.
For the best first impression after installation, we recommend removing deeper creases before install whenever possible.
Installation Tips
Move the seats forward/backward and up/down during installation for easier positioning
Take time adjusting the material placement for best fitment
Pull the material taut during installation for improved appearance
Some lower front-seat Velcro straps were designed around multiple Juniper configurations and may not apply to every trim variation
If a lower strap does not align on your vehicle, it is not critical for installation since seat pressure and overall fitment help keep the cover secured properly
Taking additional time during installation will significantly improve final fitment and appearance.
Why You’ll Love It
This full seat cover set gives your Model Y Juniper a cleaner, upgraded interior look while protecting the factory seats underneath. The Nappa leather-style finish blends naturally with the Tesla interior, making it a strong option for daily drivers, families, pet owners, and anyone who wants added protection without dramatically changing the factory feel.
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Upgrade your driving comfort with this Front Seat Leg Support Cushion Cover designed specifically for the Tesla Model Y Juniper front seats.
This full bottom seat extension cushion helps provide additional thigh and leg support during daily driving and long road trips while maintaining a clean OEM+ appearance that blends naturally with the factory interior.
Available in factory-matched black or white perforated leather finishes to complement your Tesla interior.
Designed specifically for the front seats only.
Each order includes one single seat cushion cover.
If you would like coverage for both driver and passenger seats, please purchase quantity two.
The perforated leather-style material maintains a premium factory-inspired appearance while remaining compatible with normal seat heating and ventilation functions.
Please note:
Wrinkles or creases may be present from packaging and shipping. These can be reduced quickly using a clothing steamer or by allowing the cushion to sit in the sun. Remaining wrinkles will naturally relax over time through normal use and heat exposure.
Features
Designed for Tesla Model Y Juniper 2026+
Front seat bottom coverage only
Extra thigh and leg support
OEM+ fit and appearance
Factory-matched black or white color options
Premium perforated leather-style finish
Helps reduce fatigue during long drives
Compatible with heated and ventilated seats
Easy to clean surface
Single-piece design
Comfortable cushioned support
Compatibility
Compatible With:
Tesla Model Y Juniper 2026+
Front seats only.
Not designed for rear seats.
What's Included
1x Front Seat Leg Support Cushion Cover
For both front seats, purchase quantity two.
Installation & Wrinkle Notice
Due to folding during packaging and shipping, temporary wrinkles or creases may be visible upon arrival.
For faster results:
Use a clothing steamer to help release deeper creases
Let the cushion sit in direct sunlight
Allow normal usage and interior heat to naturally relax the material over time
Most wrinkles will continue improving over the first few weeks of use.
Why You'll Love It
This is one of the easiest comfort upgrades you can add to your Tesla interior. The added leg support helps reduce pressure and fatigue during longer drives while maintaining a clean factory-style appearance that looks right at home inside the cabin.
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Add practical hidden storage to your Tesla Model Y Juniper with these Rear Under Seat Storage Trays designed specifically for the rear driver-side and rear passenger-side seat areas.
Designed to sit directly on the rear seat rails, these trays slide smoothly for easy access while remaining securely in place during daily driving. Perfect for organizing wipes, umbrellas, charging cables, small tools, snacks, and other everyday essentials while keeping your cabin cleaner and more organized.
Made from durable ABS material, these trays are lightweight, easy to clean, and designed to blend naturally into the Tesla interior with a clean OEM+ appearance.
Features
Custom fit for Tesla Model Y Juniper 2026+
Rear under seat storage solution
Includes both rear driver and passenger side trays
Slides smoothly for easy access
Designed to stay securely in place during driving
Durable ABS construction
Easy to clean surface
Helps reduce cabin clutter
OEM+ style appearance
Black finish
Compatibility
Tesla Model Y Juniper 2026+
What's Included
2x Rear Under Seat Storage Trays
Why You'll Love It
These rear under seat trays help maximize unused interior space while keeping everyday items organized and hidden from view. The slide-out design makes access easy while maintaining a clean factory-style appearance throughout the cabin.
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Maximize unused space in your Tesla Model Y Juniper with these Front Under Seat Storage Trays designed specifically for the front driver and front passenger seats. This 2-piece set provides a clean and practical hidden storage solution while maintaining an OEM+ interior appearance.
Designed to sit directly on the front seat rails, the trays slide in and out easily for quick access while remaining securely in place during normal driving. Perfect for storing umbrellas, wipes, charging accessories, tools, and other everyday essentials without cluttering your cabin.
Made from durable black TPE material, these trays are waterproof, easy to clean, and built for daily use. Their low-profile design keeps items hidden while making use of otherwise wasted space beneath the front seats.
Why You'll Like It
Custom fit for Tesla Model Y Juniper
Includes both driver and front passenger side trays
Hidden front under seat storage solution
Slides smoothly for easy access
Designed to stay securely in place during driving
Great for organizing daily essentials
Durable waterproof TPE material
Easy to clean and maintain
Helps reduce cabin clutter
OEM+ appearance
Compatibility
Tesla Model Y Juniper
What's Included
2x Front Under Seat Storage Trays
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Protect your Tesla interior from everyday wear with these Seat Back Kick Protectors designed specifically for the Tesla Model 3 Highland and Model Y Juniper. Made from durable black material with built-in storage pockets, these protectors help keep your seat backs clean while adding practical rear passenger storage.
Perfect for families, rideshare drivers, or daily commuters, these protectors shield against kicks, scuffs, dirt, and stains while maintaining a clean OEM+ appearance. The integrated storage pocket provides convenient access to tablets, small essentials, and travel items.
Installation is simple with the included spring hook straps for a secure fit without tools or permanent modifications.
Why You'll Like It
Custom fit for Tesla Model 3 Highland & Model Y Juniper
Protects seat backs from kicks, scuffs, scratches, and dirt
Built-in storage pocket for tablets and small items
Easy to clean with a damp cloth
Simple no-tool installation
Secure hook strap design keeps protectors in place
Durable black finish blends with Tesla interior
Helps preserve interior resale condition
Compatibility
Tesla Model 3 Highland
Tesla Model Y Juniper
What's Included
2x Seat Back Kick Protectors
Installation Hook Straps
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Protect your Tesla center display with this soft silicone screen bezel protector designed for the Tesla Model 3 Highland and Tesla Model Y Juniper.
This protective trim cover helps shield the screen edges from scratches, bumps, and everyday wear while adding a subtle OEM+ styling touch to the interior. The soft silicone material provides added protection around one of the most frequently used areas inside the vehicle while maintaining a clean factory-inspired appearance.
Designed for easy installation, the flexible silicone construction fits securely around the display bezel without interfering with screen visibility or touchscreen functionality.
A simple and practical interior upgrade for added protection and styling.
Why You'll Like It
Designed for Tesla Model 3 Highland & Model Y Juniper
Soft silicone material helps protect screen bezel edges
Helps reduce scratches, bumps, and everyday wear
Adds subtle OEM+ interior styling
Flexible and durable silicone construction
Easy slip-on installation
Does not interfere with touchscreen operation
Clean black finish matches Tesla interior trim
Compatibility
Tesla Model 3 Highland (2024–2025)
Tesla Model Y Juniper (2026+)
What's Included
1x Silicone Screen Bezel Protector
Color
Black
Secure Checkout
Buy on eBay
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Add extra storage and organization to your Tesla Model Y Juniper interior with this dashboard storage organizer tray.
Designed to sit securely behind the front screen or along the dashboard trim, this soft silicone tray provides a convenient place to store phones, sunglasses, cards, keys, and other everyday essentials while keeping the cabin clean and organized.
The soft-touch silicone construction helps protect interior surfaces from scratches while maintaining an OEM-style appearance that blends naturally into the Tesla interior.
Simple installation makes this a quick and practical interior upgrade for daily driving.
Why You'll Like It
Designed specifically for Tesla Model Y Juniper (2026+)
Adds convenient dashboard storage space
Great for phones, sunglasses, cards, keys, and small accessories
Can be positioned behind the front screen or along dashboard trim
Soft silicone material helps protect interior surfaces
OEM-inspired design blends naturally into the cabin
Easy installation with secure placement
Helps reduce clutter and improve organization
Durable black finish matches factory interior styling
Fitment
Tesla Model Y Juniper (2026+)
Package Includes
1x Dashboard Storage Organizer Tray
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Keep your everyday essentials organized and within reach with this steering wheel organizer tray holder designed specifically for the Tesla Model Y Juniper (2026+) and Tesla Model 3 Highland (2024+).
Made from durable silicone with an OEM-inspired design, this organizer mounts securely behind the steering wheel area using adhesive backing to help prevent movement while driving. Perfect for sunglasses, keys, parking cards, coins, or positioning your phone for easy GPS viewing while on the road.
The soft-touch silicone material helps reduce rattling while blending naturally into the Tesla interior.
Why You'll Like It
Custom designed for Tesla Model Y Juniper (2026+) & Model 3 Highland (2024+)
Great storage solution for sunglasses, keys, cards, and small accessories
Convenient placement for phone GPS viewing
Soft-touch silicone construction helps reduce rattling
Adhesive-backed design helps keep the tray securely in place
OEM-inspired look blends cleanly with the Tesla interior
Easy installation with no drilling or permanent modifications
Durable black finish matches factory interior styling
Fitment
Tesla Model Y Juniper (2026+)
Tesla Model 3 Highland (2024+)
Package Includes
1x Steering Wheel Organizer Tray Holder
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Keep your phone securely mounted and within easy reach with this magnetic vent mount designed specifically for the Tesla Model Y Juniper (2026+).
This clean OEM-inspired mount integrates directly into the dashboard vent area for a factory-style appearance while providing strong magnetic hold and convenient hands-free access for navigation, music, calls, and charging.
Its compact low-profile design blends seamlessly into the Tesla interior without blocking visibility or interfering with airflow.
Features
Designed for Tesla Model Y Juniper (2026+)
Strong magnetic phone mounting system
OEM-style dashboard integration
Compact low-profile design
Clean minimalist appearance
Easy installation
Maintains easy phone access while driving
Vehicle Compatibility
Compatible with:
Tesla Model Y Juniper (2026+)
What’s Included
Magnetic vent mount base
Magnetic phone mount attachment
Why You'll Like It
This magnetic phone holder provides a clean factory-style mounting solution without bulky windshield mounts or vent clips. The low-profile design blends naturally into the Tesla dashboard while keeping your phone secure and easily accessible for navigation and daily driving.
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Add convenient fast charging access to your Tesla with this compact OBD USB charger adapter designed for the Tesla Model Y Juniper (2026+) and Model 3 Highland (2024+).
Featuring both USB-A and USB-C charging ports, this plug-and-play adapter provides convenient power access for charging phones, accessories, dash cams, and other USB-powered devices directly from the vehicle’s OBD port.
Its compact low-profile design blends cleanly into the interior while supporting fast charging protocols for modern devices.
Features
Designed for Tesla Model Y Juniper (2026+)
Compatible with Tesla Model 3 Highland (2024+)
Dual-port charging design
USB-A and USB-C outputs
Supports fast charging protocols
Compact low-profile fitment
Plug-and-play installation
Great for charging accessories and devices
Clean OEM-style appearance
Vehicle Compatibility
Compatible with:
Tesla Model Y Juniper (2026+)
Tesla Model 3 Highland (2024+)
What’s Included
OBD USB charger adapter
USB-A charging port
USB-C charging port
Why You'll Love It
This compact charging adapter adds convenient USB charging access without bulky cables or additional wiring. The low-profile design integrates cleanly into the vehicle while providing reliable fast charging support for phones, accessories, and other USB-powered devices.
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Keep your Tesla wireless charging area clean and protected with this precision-fit silicone charging pad protector designed for the Tesla Model Y Juniper (2026+) and Model 3 Highland (2024+).
Made from premium soft-touch silicone, this protector helps guard against scratches, dust, spills, fingerprints, and daily wear while maintaining full wireless charging functionality. The OEM-style fitment blends seamlessly into the factory interior for a clean and minimal look.
Easy to install and remove for cleaning, this is a simple interior upgrade that helps preserve your Tesla’s center console charging area.
Why You'll Like It
Precision molded for OEM-style fitment
Premium soft-touch black silicone finish
Protects against scratches, dust, and spills
Easy to clean and maintain
Does not affect wireless charging performance
Quick drop-in installation
Clean minimalist appearance that matches the factory interior
Fitment
Tesla Model Y Juniper (2026+)
Tesla Model 3 Highland (2024+)
What's Included
1x Silicone Wireless Charging Pad Protector
Secure Checkout
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.
Protect your Tesla Model Y Juniper rear passenger display with this premium HD tempered glass screen protector designed specifically for the 2026+ Juniper refresh rear touchscreen.
The HD clear finish helps preserve the original brightness, sharpness, and color clarity of the rear display while providing protection against scratches, fingerprints, and everyday wear. Designed for smooth touch responsiveness and a clean OEM-style appearance.
Features
HD crystal clear finish
Preserves display brightness and clarity
Tempered glass protection
Scratch-resistant surface
Smooth touch response
Precision fit for Tesla rear display
Rounded edge design for OEM-style fitment
Easy installation
Vehicle Compatibility
Compatible with:
Tesla Model Y Juniper (2026+)
Not compatible with:
Previous generation Tesla Model Y
Tesla Model 3 Highland rear display
What’s Included
HD rear tempered glass screen protector
Cleaning wipes
Dust removal stickers
Installation accessories
Why You'll Love It
The HD clear finish maintains the original look and sharpness of the rear passenger display while helping protect against scratches, fingerprints, and daily wear. Perfect for Tesla owners looking for added rear screen protection without changing the factory screen appearance.
Secure Checkout
Secure checkout powered by eBay — trusted payments, fast shipping, and buyer protection.
Protect your Tesla display with this premium HD tempered glass screen protector designed specifically for Tesla vehicles equipped with the standard 15-inch center touchscreen.
The HD clear finish helps preserve the original brightness, sharpness, and color clarity of your Tesla display while providing protection against scratches, fingerprints, and everyday wear. Designed for smooth touch responsiveness and a clean OEM-style appearance.
Features
HD crystal clear finish
Preserves display brightness and clarity
Tempered glass protection
Scratch-resistant surface
Smooth touch response
Precision fit for Tesla 15.4-inch displays
Easy installation
OEM-style appearance
Vehicle Compatibility
Compatible with:
Tesla Model Y (2020–2025)
Tesla Model 3 (2017–2025)
Not compatible with:
Tesla Model 3 Highland (2024+)
Tesla Model Y Juniper (2026+)
What’s Included
15" HD tempered glass screen protector
Cleaning wipes
Dust removal stickers
Installation accessories
Why You'll Love It
The HD clear finish maintains the original look and brightness of your Tesla display while helping protect against scratches, fingerprints, and daily wear. Perfect for Tesla owners looking for added screen protection without changing the factory screen appearance.
Secure Checkout
Secure checkout powered by eBay — trusted payments, fast shipping, and buyer protection.
Keep your Tesla display protected with this premium matte tempered glass screen protector designed specifically for Tesla vehicles equipped with the 15-inch center touchscreen.
The matte finish helps reduce fingerprints, glare, and reflections while maintaining smooth touch responsiveness and a clean OEM-style appearance. Designed for everyday driving, this protector helps guard against scratches, smudges, and normal screen wear.
Features
Matte anti-glare finish
Helps reduce fingerprints and smudges
Tempered glass protection
Scratch-resistant surface
Smooth touch response
Precision fit for Tesla 15-inch displays
Easy installation
OEM-style appearance
Vehicle Compatibility
Compatible with:
Tesla Model Y (2020–2025)
Tesla Model Y Juniper (2026) w/ 15 inch screen (early model)
Tesla Model 3 (2017–2025)
Not compatible with:
Tesla Model Y Juniper (2026+) Performance and updated 16 inch screen
What’s Included
15" matte tempered glass screen protector
Cleaning wipes
Dust removal stickers
Installation accessories
Why You'll Love It
The matte surface helps minimize glare and fingerprints while giving the display a smoother feel during daily use. Perfect for Tesla owners looking to maintain a cleaner screen appearance while adding extra protection against scratches and wear.
Secure Checkout
Secure checkout powered by eBay — trusted payments, fast shipping, and buyer protection.
Keep your Tesla Model Y Juniper glovebox organized and easy to access with this drawer-style storage organizer designed specifically for the refreshed Juniper interior.
The slide-out tray design helps separate small everyday items while maintaining a clean OEM-style appearance inside the cabin.
Product Highlights
Custom-fit glovebox organizer for Tesla Model Y Juniper
Drawer-style slide-out storage design
OEM-style fitment and appearance
Quick access organization
Helps reduce clutter inside glovebox area
Lightweight durable ABS construction
Easy no-drill installation
Maintains clean factory interior look
Fitment
Compatible with:
Tesla Model Y Juniper (2026+)
Why We Like It
The Juniper interior has a very clean minimalist layout, but small items can quickly become disorganized inside the glovebox area. This organizer adds a much more functional storage solution while still looking factory-installed.
What’s Included
Glovebox organizer tray
Installation Notes
Slides directly into the glovebox area
No tools or modifications required
Easy removable design for cleaning
Secure Checkout
Secure checkout powered by eBay — trusted payments, fast shipping, and buyer protection.
Upgrade your Model Y Juniper interior with accessories designed for clean fitment, better organization, and everyday usability.
Add a clean performance-inspired accent to your Model Y Juniper interior with this real dry carbon fiber dashboard LED light strip trim cover.
Designed specifically for the long dashboard trim surrounding the ambient LED light strip, this lightweight carbon fiber overlay enhances one of the most visible areas of the cabin without replacing the original dashboard assembly.
Choose between Gloss for a deeper, reflective carbon fiber finish or Matte for a more subtle and refined appearance.
Product Highlights
Real dry carbon fiber construction
Available in Gloss or Matte finish
Designed specifically for the dashboard LED light strip area
Precision fit for the Model Y Juniper
Lightweight, thin-profile construction
Performance-inspired interior styling
Installs over the existing dashboard trim
2-piece construction provides full-width coverage
No drilling or permanent modification required
Fitment
Tesla Model Y Juniper (2026+)
Not compatible with the previous-generation Model Y dashboard.
What's Included
2x Real Dry Carbon Fiber Dashboard LED Trim Pieces
Pre-applied adhesive for installation
Important: This is intentionally a 2-piece set. Because of the overall length and width of the dashboard trim, the manufacturer produces it in two sections that install end-to-end across the dashboard.
Some loose-product photos show the two pieces positioned next to each other simply for display. That is not their installed orientation.
Why We Like It
The ambient light strip runs across a large portion of the Juniper dashboard, making this trim a noticeable upgrade without completely changing the interior.
Using real dry carbon fiber gives the cabin authentic weave and texture, while the choice of Gloss or Matte makes it easy to coordinate with other carbon fiber interior accessories.
Installation Notes
Clean and dry the dashboard trim thoroughly before installation.
Test-fit both pieces before removing the adhesive backing.
The two sections install end-to-end across the dashboard.
Carefully align the pieces along the LED light strip area before applying pressure.
Apply firm, even pressure after installation to help the adhesive bond.
Installing in a warm environment can help improve adhesion.
Secure Checkout
BUY ON EBAY
Secure checkout powered by eBay - trusted payments, fast shipping, and buyer protection.